Introduction: Clinical performance of light cured resin composites is related to their degree of polymerization. The purpose of this study was to compare the degree of conversion of packable and hybrid composites by FTIR (Fourier TRANSFORM Infrared Spectroscopy).Materials & Methods: In this experimental study, 40 composite disks were prepared in two groups from Z250 and P60 composites. Each group was divided into four subgroups (2mm thickness cured with QTH unit, 2mm thickness cured with LED unit, 5mm thickness cured with QTH unit, and 5mm thickness cured with LED unit). Then samples were evaluated by FTIR to determine the degree of conversion (DC). Data were analyzed by Kolmogorov-Smirnov and three way ANOVA.Results: There was not a significant difference among the DC of the materials tested. LED significantly increased the degree of conversion of materials tested (P<0.001). DC values were significantly greater in 2mm diameter samples vs 5mm ones (P<0.001).Conclusion: The use of incremental technique in deep cavities restored with these composites is suggested. Also using LED is advised for curing composites because of a better result.

Background: A fair amount of important objects in natural images have circular and elliptical shapes. For example, the nucleus of most of the biological cells is circular, and a number of parasites such as Oxyuris have elliptical shapes in microscopic images. Hence, atomic representations by two‑ dimensional (2D) basis functions based on circle and ellipse can be useful for processing these images. The first researches have been done in this domain by introducing circlet TRANSFORM. Methods: The main goal of this article is expanding the circlet to a new one with elliptical basis functions. Results: In this article, we first introduce a new TRANSFORM called ellipselet and then compare it with other X‑ let TRANSFORMs including 2D‑ discrete wavelet TRANSFORM, dual‑ tree complex wavelet, curvelet, contourlet, steerable pyramid, and circlet TRANSFORM in the application of image denoising. Conclusion: Experimental results show that for noises under 30, the ellipselet is better than other geometrical X-lets in terms of Peak Signal to Noise Ratio, especially for Lena which contains more circular structures. However, for Barbara which has fine structures in its texture, it has worse results than dual‑ tree complex wavelet and steerable pyramid.

Health monitoring allows small failures and damages to be identified and fixed before they turn into major and irreparable damages, to prevent loss of life and to make it possible to reinforce or improve it at the lowest cost. Currently, in the field of civil engineering, the health monitoring of structures is done in sensitive structures. One of the parts of the structure that may suffer initial damage before loading and during implementation due to difficulty in implementation is Concrete Filled Tube (CFT)columns.  One of the most likely damages in CFT columns is interface debonding damage. This damage causes the column to become weak and not benefit from the characteristics of steel and concrete together. Accordingly, in the present study, this damage and its severity in seismic (dynamic) parameters have been investigated. The results of the study show that damage causes changes in the mode shape of the structure, and it has caused a 6.38% reduction in the frequency in the first (main) mode of the structure. Also, the damping of the damaged specimen is reduced by approximately 12% compared to the healthy specimen. On the other hand, the results show that the severity of damage is very effective in changing seismic parameters. So that by doubling the damage area, the frequency decreased by approximately 0.35% and reached from 873.27 Hz to 20.870.20 Hz, but the mode shape of damage did not affect the frequency